Technical Information; Serial Number Location; Remote Control Linkage; High Altitude Operation - Honda GX200 Manual Del Propietário

3RZ1C8000.fm Page 11 Friday, April 13, 2018 9:19 AM

TECHNICAL INFORMATION

Serial Number Location

Record the engine serial
number in the space below.
You will need this information
when ordering parts and when
making technical or warranty
inquiries.
Engine serial number: __ __ __ __ — __ __ __ __ __ __ __
Engine type: ___ ___ ___ ___
Date Purchased: ______ / ______ / ______

Remote Control Linkage

The throttle lever is provided with hole for optional cable
attachment. The following illustrations show installation example
for a solid wire cable and for a flexible, braided wire cable. If using
a flexible, braided wire cable, add a return spring as shown.
It is necessary to loosen the throttle lever friction nut when
operating the throttle with a remote-mounted control.
REMOTE THROTTLE LINKAGE
THROTTLE LEVER
FRICTION NUT
Flexible wire core
mounting
WIRE
5mm
CIRCLIP
Solid wire core
mounting

High Altitude Operation

The LPG fueled engine does not require any modifications for high-
altitude operation. However, performance and horse power will
decrease at high altitudes.
SERIAL NUMBER &
ENGINE TYPE LOCATION
RETURN
SPRING
4 mm SCREW
OPTIONAL
WIRE HOLDER
THROTTLE
LEVER

Specifications

GX200 (PTO shaft type Q)
Length×Width×Height
Dry mass [weight]
Engine type 4-stroke, overhead valve, single cylinder
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
GX390 (PTO shaft type Q)
Length×Width×Height
Dry mass [weight]
Engine type 4-stroke, overhead valve, single cylinder
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at
-1
3,600 min (rpm) (Net Power) and at 2,500 min
Net Torque). Mass production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the operating
speed of the engine in application, environmental conditions,
maintenance, and other variables.

Tuneup Specifications

GX200
ITEM SPECIFICATION
Spark plug gap 0.4–0.5 mm
(0.016–0.020 in)
Idle speed
1,400 +200 min
Valve clearance IN: 0.15±0.02 mm
EX: 0.20±0.02 mm
(cold)
Other specifications
GX390
ITEM SPECIFICATION
Spark plug gap 0.7–0.8 mm
(0.028–0.031 in)
Idle speed
1,400 ±150 min
Valve clearance IN: 0.15±0.02 mm
EX: 0.20±0.02 mm
(cold)
Other specifications
ENGLISH
321×376×335 mm
(12.6×14.8×13.2 in)
16.0 kg (35.3 lbs)
3
196 cm (12.0 cu-in)
[68.0×54.0 mm (2.7×2.1 in)]
-1
4.1 kW (5.6 PS)/3,600 min (rpm)
12.4 N∙m (1.26 kgf∙m, 9.1 lbf∙ft)/
-1
2,500 min (rpm)
0.60 L (0.53 lmp qt)
Forced air
Transistor magneto
Counterclockwise
406×460×448 mm
(16.0×18.1×17.6 in)
30.7 kg (67.7 lbs)
3
389 cm (23.7 cu-in)
[88.0×64.0 mm (3.5×2.5 in)]
-1
7.9 kW (10.7 PS)/3,600 min (rpm)
24.0 N∙m (2.45 kgf∙m, 17.7 lbf∙ft)/
-1
2,500 min (rpm)
1.1 L (1.0 lmp qt)
Forced air
CDI magneto
Counterclockwise
-1
(rpm) (Max.
MAINTENANCE
Refer to page: 9
-1
(rpm)
-1
–150 min (rpm)
See your authorized
Honda dealer
No other adjustments needed.
MAINTENANCE
Refer to page: 9
-1
(rpm)
See your authorized
Honda dealer
No other adjustments needed.
11