Maintenance Scedule; Important Safety Instructions; Service And Maintenance Operations; Clean The Brush Rollers And Side Brushes - Alto FLOORTEC 380 M Instrucciones De Manejo

3 Maintenance and Service
3.1

Maintenance Scedule

Raise the side brushes
from the ground
Empty the dirt collecting
tank
Clean the brush rollers
and side brushes

Clean the machine

Replace work brush
rollers
Replace worn side
brushes
Replace drive belts
3.2 Important Safety
Instructions
3.3 Service and Maintenance
Operations
3.3.1 Raise the side brushes
from the ground
3.3.2 Empty the dirt
collecting tank
3.3.3 Clean the brush rollers
and side brushes
3.3.4 Clean the machine
After the end of work
x
x
x
CAUTION!
Carry out only the service
and maintenance op-
erations described in the
operating manual.
• Turn the adjusting knobs to
raise the side brushes from
the ground
see 2.4
• Remove any string, wire, etc.
from the brushes.
• Clean the machine at regular
intervals with a damp cloth.
All bearings are maintenance-
free and dust-tight.
Monthly
x
For all other service and main-
tenance operations, contact Alto
Service.
Use only original Alto accesso-
ries and spare parts.
This will help to maintain the
brushing capacity of the ma-
chine and prevent machine
damage caused by jamming of
the drive.
CAUTION!
Do not clean the machine with a
high-pressure cleaner!
FLOORTEC 380 M
english
As required
x
x
x
x
x
x
7