Imetec Q5901 Instrucciones De Uso página 17

Ocultar thumbs Ver también para Q5901:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
ASSEMBLY, PREPARATION AND CLEANING BEFORE FIRST USE
• Remove the appliance from the packaging and remove any packing fillers or adhesive labels.
• Take the cable out of its housing in the base of the appliance.
• Connect the power plug to the mains socket.
The machine is supplied with a tube that can be used with the vacuum-pack containers
available on the market and with a roll of ready-to-use bags.
WARNING!
signs of damage.
WARNING!
THE FUNCTIONS OF THE VACUUM-PACKER MACHINE
Button for automatic operation and switch-off
Suction and automatic sealing for dry food: cold meats, meat, cheeses.
Sealing button
Sealing to close the bags without eliminating the air. Ideal for pasta, flour or rice.
Vacuum level button
2 vacuum levels: High for hard or dry food, and Low for crumbly or moist food.
Sealing speed button
2 sealing speeds: Standard for hard or dry food, and Slow for delicate or moist food.
Manual mode button
Manual suction for delicate foodstuffs.
Accessories function
To vacuum store in specific containers. To be used with the tube accessory supplied.
USE
• Connect the power plug to the mains socket.
• Raise the lid by pressing the lid open/close buttons on the sides of the machine.
• Position the bag with its open side in the basin [Fig. B]. Leave about 4-5cm of space in the
upper part of the bag to ensure a better vacuum level.
• Close the lid and press its sides slightly down with the palms of your hands, locking it at the
same time by pressing the lid open/close buttons with your fingers.
• For automatic operation: press the automatic operation and switch-off button.The vacuum-
packer machine will perform the vacuum packing and sealing automatically. In this way, the
machine works with the pre-set parameters (high vacuum level and standard sealing time).
• If you want to personalise the settings, select the required vacuum level and sealing speed
by pressing the vacuum level and sealing speed buttons respectively. To start, press the
ACCESSORIES
USE
DO NOT use this appliance if there are visible
DO NOT let liquids or dust enter the pump.
EN
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido