Set-Up; Unpacking; Setting Up The Ekt Hei-Con; Mounting The Fixation Rod On The Magnetic Stirrer - Heidolph EKT Hei-Con Instrucciones De Empleo

E
1

Unpacking

Unpack the instrument with care. Inspect for damage and report such damage or missing
parts to your supplier right away.
2

Setting up the EKT Hei-Con

2.1

Mounting the fixation rod on the magnetic stirrer

(Fixation rod: Accessory 509-81000-00)
Unscrew the black cap (E) on the top of the magnetic stirrer.
Screw the fixation rod (C) into the same opening.
2.2

Mounting the holder for the temperature measuring sensor

(Accessory 509-67000-00)
Unscrew the knurled screw (G) on the holder (F)
Lower the holder opening over the fixation rod
Tighten the knurled screw, thereby securing the holder in the required position

SET-UP

20