Charging - aqprox appEB02G Guía De Usuario

Power On and Off the Reader
 Press and hold the [Power] button for 3 seconds to turn on Reader.
 It may take a few moments for reader to turn on and loading the
content.
 If Reader does not turn on, charging is required.
 To turn off Reader, press and hold [Power] button for 3 seconds.
Charging the Reader
 You need to charge the Reader prior to using it for the first time or
when battery power is low.
 Please turn the Reader to standby mode to shorten the charging
process.
 It will take about 6 hours to fully charger the reader in standby
mode (LCD off)
 You can also charge the reader by connecting to PC. Upon
successful connection to PC, press the OK button to select
"Power". Charging through PC may not be able to fully charge the
reader due to the low output charging current from PC USB port.
 When DC /USB power cable is connected to the reader for
charging, the reader will enter into standby mode after remains
idle for 60 s. Press the [Power] button to wake up the reader.
 The battery status is displayed at the bottom left corner. The
remaining battery playback time is displayed right next to the
battery icon.
Getting Started
3