Attenuation Measurement In The Optical Communications Network - Promax PROLITE-105 Manual De Instructiones

•
Press the SEQ
mode for signal output.
•
From the menu ATTENUATION TEST of the PROLITE-67, catch the power
reference by pressing simultaneously both arrow keys.

6.3 Attenuation measurement in the optical communications network

Next the procedure to take the measurement is described (see figure 4).
Attenuation measurement in the optical communications network.
Figure 4.-
•
Connect the PROLITE-105 to the transmission node from the optical
communications network that is desired to verify.
Page 14
[5] key on PROLITE-105 to activate the simultaneous
Figure 5.-
USER'S MANUAL. PROLITE-105
03/2011