ZIBRO CLIMA D12 Instrucciones De Uso página 27

DEHUMIDIFIER INSTRUCTIONS FOR USE
To guarantee maximum safety and optimum efficiency, we strongly recommend
that you read these instructions carefully before installing and operating the
dehumidifier.
THE DEHUMIDIFIER
The function of the machine is to reduce the level of humidity in the room where
it is installed. The dehumidifier is specifically intended for rooms where an
undesirably high humidity level is created, e.g. kitchens, basements, etc.
The machine is fitted with wheels and handles for convenient transportation.
Studies have revealed that environments with a relative humidity between 45%
and 60% are ideal for both humans and animals, and the preservation of objects.
A
INSTALLATION
Place the machine in the room in which the humidity must be reduced. Leave a
gap of at least 50 cm. around the machine to ensure effective circulation.
Check the following before activating the machine:
Do you have the correct mains voltage, as stated in the "Technical
specifications"?
Is the plug suitable for the wall socket? If this is not the case, the plug may
only be replaced by a qualified individual.
Are you using an earthed socket?
B
OPERATION
Insert the plug into the socket and press the
1
indicate that the device is switched on.
Check whether the
2
properly and does not need to be emptied.
-button
-light » is off. If so, the reservoir has been placed
. Light lights up to
4
27