Telephone Helpline: 0845 146 2887 (United Kingdom)
Operation
Remove the appliance from the packaging. Make sure
1.
that all protective plastic film and plastic coatings are
thoroughly removed from all surfaces.
Note: Before using for the first time, clean the
interior of the appliance and all parts in warm
soapy water, then rinse thoroughly.
Brewing Coffee
Pour fresh cold water into the urn; filling it at least half
1.
way. Use the level indicator on the front of the
appliance as a guide.
Fill the Filter basket with the desired amount of ground
2.
coffee and cover with the Basket cover.
Insert the Percolator tube into the urn.
3.
Note: Ensure the base of the Percolator tube is
securely located into the base of the percolator.
Slot the Basket tray over the Percolator tube. Rest the
4.
tray securely on the lugs protruding from the Percolator
tube.
Place the Filter basket and cover over the Percolator
5.
tube and onto the Basket tray.
Place the lid on the Coffee Percolator.
6.
Connect to the power supply and turn On to begin
7.
brewing the coffee.
WARNING: The outside of the appliance
becomes very hot during use. DO NOT TOUCH!
The 'Ready' light is illuminated when the coffee has
8.
been brewed. The coffee is kept at serving temperature
by the percolator.
Turn the power switch OFF when the level indicator is
9.
almost empty, or the equivalent of 3 cups of coffee is left
in the urn, to prevent any damage to the heating element.
Note: DO NOT allow the appliance to boil dry.
This invalidates the warranty.
Percolator tube
Urn base
Lid
Basket cover
Filter basket
Basket tray
Percolator
tube
Level
Indicator top
Urn
Level
indicator
Ready light
Tap
On/Off
switch
UK
2