Ltc Audio LF10R Manual De Uso página 3

Once the battery is charged, unplug the mains adaptor/cigar lighter lead from the DC socket of the lamp and put back the
protective rubber cap on the DC connector.
Press the ON/OFF button (2) next to the DC connector to switch the lamp on and off.
You can adjust the light intensity via the red + and – buttons (3).
5. Fixture Cleaning
The cleaning of the glass pane must be carried out periodically to optimize the light output. Cleaning frequency depends
on the environment in which the lamp is used.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
Specifications
Supply Voltage
Charging voltage
Li-ion battery
Power
Light source
IP rating
Light intensity
Colour temperature
Vertical adjustment angle
Projection angle
Dimensions
Weight
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2014
LF10R
8.4Vdc 1A
7.4V 2200mAh 11.1V / 4,400mAh
10W
1x 10W EPISTAR 1x 20W EPISTAR chip
chip LED
900 lm
190 x 150 x 245mm 2.5 x 185 x 260mm
1.1kg
LF20R
AC220～240V 50/60HZ
12.6Vdc 1A 25.2V 1A
22.2V/4400mAh
20W
1x 30W chip
LED EPISTAR LED
IP65
1800 lm
4000-4500°K
120°
90°
285 x 205 x 300mm
1.7kg
LF10R
LF30R LF50R
25.2V 1A
22.2V/6600mAh
30W 50W
1x 50W EPISTAR chip
LED
2700 lm 4500 lm
355 x 205 x 360mm
3.5kg 6kg
3