ulsonix Pro-clean 0.7 Manual De Instrucciones página 11

7. Setting the wave frequency: Pressing the Pulse
button (#6) increases the wave frequency to 120%
of the default value. The corresponding LED light
will illuminate. Pressing the Pulse button again will
reduce the value to 100%. The corresponding LED
will go off.
8. Setting the ultrasonic power: The default value is set
to 40% and can be increased to 70% or 100%. To
change the value, press the Power button (#9) until
the desired value is displayed.
9. Once cleaning is complete, switch the device off
(power button #1). Remember to unplug the device
after use. Empty any liquids from the tank and
remove any objects.
BASIC WITHOUT HEATER
2
1
OPERATION
1. Once the switch is rotated clockwise, the machine
will enter into the time operating mode. The time
can be freely modified in accordance with the indica-
tion at the edge of rotary switch on the panel.
2. The green work indication lamp will turn on and
the ultrasonic will send out the working sound of
"squeak" and the machine will start working.
3. The cleaning machine will turn off automatically
when time is up.
4. Rotate the switch anticlockwise to start long-term
operating mode. The infinity mark ∞ is indicated in
the panel.
5. Green working indicator lamp is on and the ultra-
sonic sends out the working sound of "squeak" and
starts working and will continue working.
6. When cleaning is completed, in order to power
off please rotate the switch clockwise to the "off"
manually.
20
REGULAR CONTROL OF THE DEVICE
Check regularly the device to see if it presents any damages.
If there is any damage, please stop using the device. Please
contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the
following information:
• Invoice number and serial number (the latter is to
be found on the technical plate on the device).
• If relevant, take a picture of the damaged, broken or
defective part.
• It will be easier for your customer service clerk to
determine the source of the problem if you give a
detailed and precise description of the matter. Avoid
ambiguous formulations like "the device does not
heat", which may mean either that it does not heat
enough or that it does not heat at all. The more
detailed your information, the better the customer
service will be able to solve your problem rapidly
and efficiently!
CAUTION: Never open the device without the
authorization of your customer service. This can lead to
a loss of warranty!
Rev. IV 2017
MANUEL D´UTILISATION
N E TT O Y E U R À U LT R A S O N S
FR