CONTROL
1. Microphone
2. Led indicator
3. Vol+ / next
4. Vol- / previous
5. Bluetooth selfie key
6. Mode key
7. ON/OFF / Speaker mute
key
8. MicroUsb port
9. Lanyard
10. MicroSD port
11. Earphone jack
CHARGING
1. Using the included USB cable, connect the side with the Micro
USB plug to the speaker (8) and the other end to the USB port
of your PC or USB power adapter (not supplied).
2. The charge indicator (2) will light up to indicate charging status.
3. Unplug the appliance when the charging indicator (2) turns off.
4. When the battery is low, the device will emit a voice message
"LOW BATTERY" for several minutes before turning off.
BASIC OPERATION
1. Press and hold the ON/ OFF button (7) to turn on the speaker.
- If you insert a microSD memory, the device will boot in reader
mode, the voice guide indicates "CARD READER" and the unit
will start music playback of songs in memory.
- In BT (Bluetooth) mode, the voice guidance will indicate
'"CONNECTION" and the speaker start in search mode and try
to connect to the available devices.
User's Manual
7
E N