Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
05
Your power supply might cause TV or FM radio interference. To determine
whether your power supply is causing interference, simply turn off your power
supply. If the interference goes away, your power supply is causing it. Try
moving your power supply away for the affected source.
Example: Using a single with multiple batteries
Fuse all connected devices as recommended by the manufacturer.
Mode
Slave
Master
Notes:
1. In single unit application, master mode should be selected. In situation when
slaved is wrongly selected the output will give 17V DC, which will trigger high
voltage protection. When this happens, slide the switch to master and restart
the unit.
2. In multiple unit application, make sure all power supplies are properly linked
by connecting cable. In order to work, there must be one unit selected as master
output controlled unit.
3. Only the unit with Master selected is able to control the output.
Publicidad
Tabla de contenido
