EN
MAKING COFFEE
1
Before use, plug in the
appliance. Unplug when
not using for a long
time.
4
Insert a paper filter (1x4,
not included), and fill
with the desired amount
of ground coffee.
NOTE
Let the appliance rest for at least 5 minutes before next operation.
OCM500_A5_140219 (1.2).indb 16
OCM500_A5_140219 (1.2).indb 16
16
2
Fill the water tank with
cold, fresh water to
desired level. Do not fill
below 2 cups or beyond
MAX mark (10 cups), as
shown on the water
level indication.
5
Switch on the appliance
(I). When all the water
has run through, the
brewing process is
finished. Switch off the
appliance (0).
3
Place the funnel
correctly. Lower the
handle until it locks into
place.
6
Remove the jug from
the stand.
19/2/14 7:05 PM
19/2/14 7:05 PM