Operation; Dispense Liquid - Caterlite K711 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Operation

Pump button
Inner pot
Control panel
Water level indicator
Lift the latch to open the lid.
1.
Fill the appliance with liquid. Do not fill above the FULL line.
2.
Close the lid, ensuring it locks firmly in place.
3.
Plug in the power cord and connect it to the mains power supply.
4.
The BOILING indicator lights up and the appliance begins to heat.
5.
Note: The appliance will take approximately 45 minutes to heat up when filled with cold
water.
Once the correct temperature has been reached, the KEEP WARM indicator lights up and the appliance
6.
is ready to dispense.
WARNING: There is a danger of scalding when opening the lid during and after use. Take
care to avoid the expulsion of steam.

Dispense Liquid

There are 3 methods of dispensing liquid:
Hold a suitable receptacle beneath the spout.
1.
Push the POUR OUT button to dispense the liquid
2.
or
Unlock the Pump button and push down repeatedly to pump out the liquid
or
Press the receptacle against the switch behind the spout.
Lid lock
Spout
UK
Steam vent
Pump button lock
Lid
Handle
'FULL' level
'Touch-cup' switch
Rotary base
2