Publicidad
1. Transmission source
•
The source where the signal will be transmitted.
2. Signal transmission indication
•
Blink to confi rm that the last setting has been transmitted to the unit.
3. "ON/OFF" Button
•
Press once to start the air conditioner unit.
•
Press again to stop the unit.
4. Fan speed selection
•
Pressing the
order:
•
Stop pressing when the desired fan speed appears on the display screen.
5. Operation mode
•
Press the MODE button to select the type of operating mode.
•
For cooling only unit, the available modes are: COOL ( ), DRY ( ) and
FAN ( ).
•
For heat pump unit, the available modes are: AUTO (
DRY ( ), FAN ( ) and HEAT ( ).
•
The AUTO ( ) mode is unavailable for chilled water system.
6. Automatic air swing
•
Press the SWING
•
To distribute the air to a specifi c direction, press the SWING
until the louver move to the desired direction and press the button once again.
Swing mode selection method (for cassette)
•
Press SWING ( ) button for 4 seconds to enter fi eld setting mode. While in fi eld
setting mode, it will only show SWING MODE (
•
Press temperature
Swing Mode 1 to Swing Mode 3.
•
There are 3 different SWING MODE, which are:
Swing mode 1
SWING MODE will not activate unless SWING is activated.
Swing is indicated by the logo:
•
If no mode changes within 4 seconds, unit will operate according to the selected
SWING MODE (
7. Turbo function (model dependent)
•
Press
for fast cooling or heating operation.
•
Fan speed turn to maximum speed.
•
Press again to deactivate the function.
•
Available under HEAT and COOL modes only.
•
Any change of fan speed will deactivate this function.
•
The Turbo function ( ) is unavailable for chilled water system and remote control
with SWING MODE (
OPERATING GUIDE
button continuously will toggle the fan speed in the following
Low
Med
button to activate the automatic air swing function.
and
button to select SWING MODE (
Swing mode 2
Swing mode 3
).
) function.
High
Auto
).
1
), COOL ( ),
button and wait
) rotation from
Publicidad
