Remove Qleaf Pro From The Ear; Fitting Procedure And Configuration; Switch Between Programs - ExSilent Qleaf Pro Manual De Usuario

Remove Qleaf Pro from
the ear
Hold the pull cord firmly and pull it – always
slowly - out of the ear.
Fitting procedure and
configuration
The fitting procedure and configuration of
the hearing aid is both an important and
individual process. For this reason, consult
your dispenser for any complaints about the
fitting or configuration. Your dispenser is the
authorized person to carry out any necessary
modifications.
Switch between
programs
When the Qleaf Pro has been configured with
more than one program (memory), programs
can be selected by AirTAP functionality. To
change between the programs, the hearing aid
wearer pats the ear gently with the hand. The
pats generate an air pressure change that is
detected by the hearing instrument to change
the program.
The Qleaf Pro is by default tuned with a single
tap function. This mode requires the user to
tap the ear once to activate the switch. The
dispenser can adjust this to a two-tap function
in consultation with the user. This additional
mode requires the user to tap the ear twice
to switch to the next program. This last mode
English 17