DIMENSIONS
a - 75,7 mm | b - 94,0 mm | c - 33,8 mm
b
a
c
Care, cleaning and maintenance
The cleaning of the optics can be done by means of an
optical cleaning cloth. Always keep the optical surfaces
clean and remove and dirt, fi nger oils or water stains
immediately to ensure a lasting performance. For cle-
aning, breathe on the optical surfaces lightly and then
use the optical cleaning cloth around the contaminants
to clean the lens surfaces. Please note that coarse dirt
particles should be removed by either blowing them
away or with a clean hair brush; otherwise you may
scratch the surface of the lenses. All external mechani-
cal components as well as the rubber armoring may be
cleaned with a soft, clean and slightly moistened clea-
ning cloth. Please do not use the optical cleaning cloth
to clean the outer components and rubber armor.
EN
33