Biotage Lysera Manual Del Usuario página 3

Data herein has been veri ed and validated. It is believed adequate for the intended
use of the instrument. If the instrument or procedures are used for purposes over and
above the capabilities speci ed herein, con rmation of the validity and suitability
should be obtained; otherwise Biotage does not guarantee results and assumes
®
no obligation or liability. This publication is not a license to operate under, or a
recommendation to infringe upon, any process patents.
This product is warranted to be free from defects in material and workmanship for a
period of TWO YEARS from the date of delivery. Biotage will repair or replace and return
®
free of charge any part which is returned to its factory within said period, transportation
prepaid by user, and which is found upon inspection to have been defective in
materials or workmanship. This warranty does not include normal wear from use; it
does not apply to any instrument or parts which have been altered by anyone other
than an employee of Biotage nor to any instrument which has been damaged through
®
accident, negligence, failure to follow operating instructions, the use of electric currents
or circuits other than those speci ed on the plate a xed to the instrument, misuse,
or abuse. Biotage reserves the right to change, alter, modify, or improve any of its
®
instruments without any obligation whatever to make corresponding changes to any
instrument previously sold or shipped.
THE FORGOING OBLIGATION IS IN LIEU OF ALL OBLIGATIONS AND LIABILITIES INCLUDING
NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY OR OTHERWISE, EXPRESSED
OR IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND EXCLUSIVE LIABILITY
AND BUYERS EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH
THE SALE OR FURNISHING OF GOODS OR PARTS, THEIR DESIGN, SUITABILITY FOR
USE, INSTALLATION, OR OPERATION. Biotage WILL IN NO EVENT BE LIABLE FOR ANY
®
SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND THEIR LIABILITY UNDER
NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH
LIABILITY IS CLAIMED.
This product has been engineered for safety; however, basic safety precautions and
common sense must always be demonstrated when using any electrical product.
- DO NOT attempt to modify any part of this product.
- DO NOT allow the machine to be submerged in any liquid.
- DO NOT use in any setting other than an indoor laboratory.
- DO NOT plug power cord into an incorrect outlet or subject it to an incorrect voltage.
- Use this product only for its intended purpose.
- DO NOT use attachments not recommended by the manufacturer.
- DO NOT operate the product if it is damaged in any way.
- Keep this product away from heated surfaces.
- DO NOT modify the plug or cord that is provided. If the plug will not t the outlet, have
the proper outlet installed by a quali ed electrician.
- DO NOT operate the product with the safety ground disconnected.
WARNING: Reduce the risk of unintentional starting; make sure the speed switch is in
the OFF position before plugging in the motor.
WARNING: Damaged or worn power cords should be repaired or replaced
immediately by a quali ed electrician.
WARNING: Improper connection of the equipment can result in a risk of electric shock.