Point of View Mobii 7-Gen II Manual De Usuario página 27

You Mobii Tablet features built-in Wi-Fi technology and 3G card slot(optional)
so that you can access the internet via Wi-Fi and 3G network.
First of all, you need to configure a Wi-Fi or 3G network(optional). For the Wi-Fi
configuration procedure to work, you need to be in a Wi-Fi zone that will allow
you to connect to it. Every time your Mobii Tablet is in range of a network that
you have already configured once, it will attempt to make a connection. For the
3G network (optional) configuration to work, you need to insert a 3G card into
the device.
Making WIFI Connection
(1) Go on the Home screen, tap on the Menu icon
" Settings" .
(2) In the " Settings"screen, select " Wireless & Networks" .
(3) If the WiFi is off, tap on the " Wi-Fi"setting to turn it on. Then select " Wi-Fi
settings" . Your Mobii Tablet will scan automatically for available WiFi
networks and display them. The list of available networks shows all the
wireless networks in range of your device.
- The list is constantly refreshed automatically.
- When the WiFi is enabled, your Mobii Tablet will connect automatically to
your configured networks when they are in range.
- If your Mobii Tablet finds a network that has never been configured, it will
display a notification icon.
(4) Tap on the network you want to connect to, enter the required network
information (password) and then tap on " Connect" . Your Mobii Tablet will
now attempt to establish a connection to that WiFi hot spot with the
network parameters you entered. If the connection is successful, the
message Connected to XXX will appear under the WIFI setting.
Note:
a) The available network list is constantly refreshed automatically.
b) When the Wi-Fi is enabled, Your Mobii Tablet will connect automatically to your
configured networks when they are in range.
c) If Your Mobii Tablet finds a network that has never been configured, it will display a no-
tification icon.
Advanced Connection
To manually scan for available Wi-Fi networks,
(1) In the " Wi-Fi settings"screen, tap on the Menu icon
" Scan" .
(2) If the Wi-Fi network you want to connect to does not appear in the list, scroll
27
and then select
, and then tap on