Maintenance And Cleaning - Princess 282997 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
4 Place the main cover on the appliance
with the neck of the bottle(s) through
the bottle opening(s).
Tip: Use one of the covers from the bottle
openings in the main cover to close the
opening below the tap cover.
When not used to close the other bottle
opening (in case there are two bottles in
the appliance) the other cover can be
stored in the opening in the bottom of the
main cover.
5 Switch on the appliance with the
temperature control wheel and adjust
the temperature setting.
The LED indicator light shows that the
cooler is switched on.
Give the appliance some time to bring
the wine to the adjusted temperature.
• The appliance may emit a little smoke
and a characteristic smell when you
switch it on for the first time. This is
normal and will soon stop. Make sure
the appliance has sufficient
ventilation.
• Always check that the use-by date on
the BIB has not expired before placing
the BIB in the appliance.
• The appliance's tap function is only
suitable for 2- or 3-liter BIB's.
• Read and follow the instructions and
warnings on the BIB before placing it
in the appliance.
• Never allow the power cord to hang
over the edge of the draining board,
worktop or table.
• Use the appliance only at a
temperature between 15 ° C and 35 ° C.
• Never expose the appliance to direct
sunlight.
• Switch off the appliance and remove
the plug from the wall socket in the
event of a malfunction during use,
before cleaning the appliance, before
6
Article 282997 Wine Tap & Cooler
fitting or removing an accessory and
before storing the appliance after use.
• Store an opened BIB at the right
temperature by leaving it in the
appliance. Ensure that the appliance
always has a power supply. If you are
not going to use the appliance for a
long period of time, remove the
opened BIB from the appliance and
store it. Read the instructions on the
BIB for storing conditions.
• Do not use damaged BIB's in the
appliance, because this may cause
damage to the appliance. Always take
a damaged BIB back to the shop
where you bought it.
Maintenance
and cleaning
1 Switch off the appliance with the
temperature control wheel. The LED
indicator will switch off.
2 Remove the plug of the adapter from
the wall socket.
3 Disconnect the adapter from the
appliance and store the adapter near
the appliance.
4 Carefully clean the appliance with a
soft, dam cloth and a few drops of
washing-up liquid, and dry thoroughly.
• Clean the appliance regularly.
• Make sure no moisture comes into
contact with the appliance's electrical
parts.
• Never immerse the appliance, the
adapter, the power cord or the plug in
water or other liquids.
• Never use aggressive or abrasive
cleaning products or sharp objects
(such as a knife or a hard brush) to
clean the appliance.

Publicidad

Tabla de contenido
loading

Tabla de contenido