Selecting Station; Automatic Memory Storing&Program Scanning; Mono/Stereo; Station Storing - Vieta Car VC-HU520BR Manual De Usuario

SELECTING STATION

Shortly press /
automatic seek function. Press for several seconds
until "MANUAL" appears on the display, the manual
tuning mode is selected. If both buttons have not
been pressed for several seconds, they will return to
seek tuning mode and "AUTO" appears on the
display then disappears.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS button for several seconds "SEARCH"
will appear on LCD.
the radio will search from the current frequency
and checks the signal strength until one cycle search
is finished. And then 6 strongest stations are stored
into the corresponding preset number button.
- Program scanning
Press AMS button shortly to scan preset station. And
the corresponding station number P1~P6 will flash
on LCD.
NOTE:
In MP3 playback mode,press the AMS key selections.

MONO/STEREO

Press MON button to select mono or stereo mode.
You can sometimes improve reception of distant
stations by selection mono operation.

STATION STORING

Press any one of the preset buttons (1 to 6) to select
a station, which had been stored in the memory.
Press this button for several seconds to store the
current station into the number button.
USB Play Operation
In the front panel of the unit, there is an USB
interface. You can connect an USB device through
this interface.
When you connect an USB device through the
interface, the unit will search the MP3 files or WMA
files in the USB driver and start to play MP3 files or
WMA files automatically.
If in other mode, you can also press MODE button to
select USB mode.
22
buttons to activate

SELECTING DIRECTORY UP/DOWN

Press DIR- button or DIR+ button to select directory
downward or upward. If the MP3/WMA file does not
contain any directory, there is no function of pressing
DIR- button or DIR+ button.

PAUSING PLAYING

Press PAU button to pause the play. Press it again to
resume play.
PREVIEWING TRACKS
Press INT button to play first several seconds of each
track. Press again to stop intro and listen to track.

REPEATING THE SAME TRACK

Press RPT button to continuously repeat the same
track. Press it again to stop repeat.
PLAYING TRACKS IN RANDOM
Press RDM button to play all tracks on the USB in
random order. Press again to cancel the function.

SELECTING TRACKS BY AMS BUTTON

Press AMS button, then You can use the volume
buttons to select the track directly.
Then press the VOLUME button or BND button to
start playing the track.

DISPLAY INFORMATION

Press DISP button to show the following information,
such as the clock, ID3 TAG (if available: song title,
directory name, artist name, other contents...) (FOR
WITH MP3 ID3 FUNCTION VERSION ONLY) and
other information.
Note:
The main unit can only support the standard USB-
n
memory device which is approved by Microsoft.
USB MP3 player is not a standard which means
n
different brand name or different models have their
own standard. So our product cannot support every
MP3 player.
When connecting an MP3 player and there has
n
normal battery in the player (non rechargeable
battery), you should remove the battery from the
MP3 player then connect it to the USB interface.
Otherwise, it may cause battery burst.
USB/SD Radio