AudioSonic TL-3470 Manual De Usuario página 5

Ethernet connection settings*:
1 Micro Interface connect to the OTG cable, the other side interface connect to the
Ethernet adapter and connect to the network cable.
→ Setting → More → Ethernet.
2 Tap
3 Check the "Use Ethernet".
4 Click the "Advanced Configure", you can choose to check the "dynamic allocation",
the default network automatically assigns IP addresses, check on and you can
connect Ethernet; you can also uncheck the "dynamic allocation", by manually
entering IP address, subnet mask, default gateway, DNS server, and other
information can also be connected to Ethernet.
5 After the Ethernet connection is successful, it will appear the Ethernet connection
symbol in the lower-right corner.
3G network settings*:
1 Micro Interface connect to the OTG cable, the other side interface connect to the
3G dongle and plug in the effective 3G card.
2 The system automatically senses the 3G network, while 3G network the
connection is successful, will appear in the lower-right corner of the 3G
connection symbol " ".
* Only available when the separately available adapter is connected (not included).
DESKTOP
1. Back icon
2. Return to Desktop from other apps
3. Recently used applications
4. Screenshot icon
5. Volume -
6. Volume +
7. Current time
Instruction Manual
8. Wifi strength indicator
9. Bluetooth connection status
10. Battery charge status
11. Google Search
12. Voice Search
13. Tap to view the applications screen
EN
5