DAS M42 Manual De Uso página 12

THE D.A.S. (Diversity Autoscan System)
The DAS system is the heart of the system of this DVB-T auto receiver. Standard receivers have been conceived
for household use only and are fitted with a static directional system.
In the car, particularly during movement, the repeaters change, and the signals is subject to the movement of our
car and our surroundings.
The Diversity Autoscan System features automatic research of the strongest signal, providing the best picture
for the channel we want to view. Should several signals of the same channel be present, DAS will select the
strongest one.
All searches and scanning are directly managed by the device, leaving the viewer with the pleasure to enjoy the
program.
DAS MENU
Press the DAS key on the remote control to switch the menu on.
TV-LIST
Press TV-List (up arrow ) to access LIST mode. The system creates a list of the channels that can be viewed at
that particular time, in order of signal strength. Press the up or down arrow to access the list of channels.
Use the same keys to select the desired channel. Press Menu/OK to confirm the selection. The menu will disappear
only after the time set in the main menu expires (information bar duration), or when pressing the MENU/OK key.
On the side of each channel is the EPG information. The firs column shows the program being programmed, while
the second one shows the program that follows.
TV-LIST zapping
While in LIST mode, it is also possible to search for the channel in Zapping mode.
Press the right arrow to access the list of channels.
12