Overall View; Technical Data - Proxxon MK 240 Manual De Instrucciones

Instruction manual
GB
PROXXON Mini-Compressor MK 240
Dear Customer
The PROXXON Mini-Compressor MK 240 is the ideal
appliance for all airbrush work. Small, powerful and
very quiet. In order to be able to operate the appliance
safely and professionally, please read the enclosed
safety and operating instructions carefully before use.

Overall view:

1. On/Off switch
2. Connection G 1/8
3. Air cleaner
5. Air hose
7. Airbrush AB 100
8. Paint container 22 ccm
9. Cylinder

Technical Data:

Voltage
Output
Cut-out function
Air output
Air pressure
Weight
Dimensions
Noise emission
For use in dry environments only
Protection class II device
Operation
Preparation
1. Connect hose 5 to adapter 2 and airbrush 7.
2. Pour airbrush paint into container 8. If necessary,
dilute with water according to manufacturer's
instructions.
- 6 -
Airbrush AB 100 is only suitable for water soluble paints
such as water-based paints, transparent, pigment, dis -
temper and water soluble acrylic paints. It is not suit -
able for oil paints, synthetic resin and other such paints
which must be diluted using solvents.
3. Connect paint container 8 Fig. 1 to airbrush 7.
Additional safety information!
The compressor has been fitted with a cut-out function.
The appliance must be switched off after 10 min. of
operation in order for it to cool off.
Do not touch cylinder 9 Fig. 1.
Risk of burns!
Do not spray the compressor with paint.
The appliance is not waterproof.
Do not spray any inflammable liquids or use for
cleaning.
Do not cover air cleaner 3 Fig. 1.
~230 V, 50/60 Hz
The appliance is not suitable for
85 W
– pumping up tyres etc.
AB 10/20 min.
– operating pneumatic tools
12 l/min.
– supplying fish tanks with oxygen.
0.2 MPa (2 bar)
1300 g
140x120x95 mm
Hand position of the airbrush
≤ 70 dB(A)
Wind the hose round your hand to keep it away from
the working area. In so doing, secure the paint
container with your fingers in order to prevent it from
inadvertently falling out.
The paint is released through the nozzle by activating
lever 1 Fig. 2.
Observe the safety instructions issued by the paint
manufacturer. Wear a face guard where necessary. Do
not spray any materials with an unknown risk factor.
Note:
Switch on compressor.
Warning!