Filling With Water; Modifying The Aroma; Switching On And Off; Cleaning - Kompernaß KH 1081 Instrucciones De Uso

Filling with water

1. Open the water tank lid 4.
2. Fill the glass jug with mains water.
Attention!
• Never fill the water tank with a total volume of
more than 12 cups of mains water.
NEVER fill the water tank with less than 3 cups
of water. Otherwise, the coffee machine could
be damaged. Use the markings on the water-fill
indicator 5.
3. Fill the water tank with the volume of water required
to brew the coffee powder. For this, you can use
either the scale on the water volume indicator 5
or the scale on the glass jug. Pay heed to pouring
the water slowly into the water tank, so that it
can run through both tank openings.
4. Close the water tank lid 4.

Modifying the aroma

• Select the desired coffee strength on the aroma
selector switch 3. The setting
coffee, the setting

Switching On and Off

• When you are ready to switch the coffee machine
on, place the On/Off switch 6 at the position
"On" (I). The integrated control lamp glows.
• When you are ready to switch the coffee machine
off, place the On/Off switch 6 at the position
"Off" (O). The integrated control lamp goes out.
• Remove the plug from the mains socket if you are
intending to discontinue using the coffee machine.
gives strong
gives mild coffee.

Cleaning

In order to obtain an optimal taste result from every
brewing process you should clean the coffee machine
after every use.
• Remove the plug from the mains socket.
Risk of electrocution!
Before you clean the Coffee Maker you MUST remove
the plug from the power socket. Under no circumstances
may the appliance be immersed in water or held
under running water during cleaning.
Risk of Burns!
Always wait until the coffee maker has cooled down
before cleaning it. Otherwise, the appliance could
become damaged.
Attention!
Do not use household detergents or sharp/pointed
objects to remove soiling. . These could damage
the appliance.
• Wipe the housing of the coffee machine and the
glass jug with a soft cloth lightly moistened with
a soapy solution. At the same time remove any
deposits that may have settled in the glass jug.
• After every use remove the filter insert 2 and the
permanent filter 1 from the filter holder 8.
• Rinse both of them under running water.
• Clean the measuring spoon 7 in a mild soapy
solution and then rinse it off with clean water.
- 21 -