Bicycle Hoist; Safety Information; Delivery Contents - Powerfix Profi KH 4056 Instrucciones De Uso

BICYCLE HOIST

KH 4056

Safety information

• Never lift more than 20 kg with the bicycle
hoist. This would damage the bicycle hoist
and cause the load to crash down.
• Check for the correct tightness of all screws
before using the bicycle hoist.
• At all times use the wall bracket for securing the
load. Otherwise, the load could crash down.
• Do not take up a position underneath the
hanging load.
• Use the bicycle hoist for storage only, not for
any other purpose.
• Do not carry out repairs on the suspended load.
• Should the nylon cord be damaged, exchange
it as soon as possible. It could tear.
Attention Ensure that the nylon cord does not
slide too fast between your hands! It could lead
to burns and abrasions!
Attention The bicycle hoist may not be operated
by weak people, for example children. The
bicycle could crash down and cause injuries.
Attention! Ensure that the double retaining
hooks cannot slip from the saddle and
handlebars of the bicycle when it is being
raised and lowered.
Intended use
The bicycle hoist is intended to save space and
relieve the tyres during bicycle storage. It is not
meant to be used for commercial purposes.

Delivery Contents

2 Ceiling brackets
2 Double retaining hooks
1 Nylon cord
1 Wall bracket for the nylon cord
10 Cross-head screws with plugs
Description of the appliance
1 Ceiling bracket
2 Nylon cord
3 Safety mechanism
4 Double retaining hooks
5 Cross-head screws
6 Plugs
Wall bracket
7
Required assembly tools:
1 Cross-head screwdriver
1 Measuring tape
1 Drill
1 Drill bit (8 mm diameter)
Assembly
The best assembly results are achieved when the
ceiling brackets are located directly above the seat
and handlebars. Ensure there is sufficient clearance
from the side walls.
1. Before taking it into use, check to ensure that
the retaining hook has a firm grip under the
saddle and is securely positioned there. This
could for example be on a raised edge, a
cross brace or something similar. If it is not
possible to secure the retaining hook on the
saddle the bicycle may not be lifted with the
bicycle hoist!
2. Measure the distance between the handlebars
and the seat on your bicycle.
- 8 -