Electrical Connection - Hella ULTRARAY Instrucciones De Montaje

012 984 XXX FLASHING
LAMP
SYNCHRONIZATION
Connect the lamps as specifi ed in
the circuit diagram.
14
APPROVAL
Hella rotating beacons Ultraray
Art. No. 012 983-XXX - Rotating,
Art. No. 012 984-XXX - Flashing,
have been offi cially type-tested
within the scope of ECE-R65. They
need to be mounted at the highest
+
–
white
point of the vehicle and, when the
vehicle is loaded during opera-
tion, they must be vertical to the
road surface. All rotating beacons
are RFI suppressed and comply
with VDE 0879 Part 2. They are
EC-approved according to Directive
72/245 EEC in version 2006/28 EC.
+
30
–
31
black

ELECTRICAL CONNECTION

(fuse-protected positive line)
Use a cable cross-section of at least
1.5 mm 2 ,
10 A slow-blow fuse.
+
–