Servicing; Changing The Shoe Polish Container (Images A1 And A2) - Beem Comfort Clean Manual De Instrucciones

EN

Servicing

Changing the shoe polish con-
tainer (images A1 and A2)
To change the shoe polish container, pro-
ceed as follows:
First remove the holder (2) for the shoe
‹
polish container by pressing the metal
latch (1) on the side of the holder.
Remove the holder with the shoe
‹
polish holder (3) towards the right.
Remove the shoe polish container
‹
from its holder (3) and replace it.
Put the shoe polish container back into
‹
the holder and replace it into the ma-
chine. To do this, hang the holder from
the right – the opening of the shoe
polish container points downwards –
and press the holder backwards until
the metal latch audibly snaps in.
BEEM - Elements of Lifestyle
Changing the brushes (image B1)
To change the brushes, loosen the
‹
respective screw that fixes the brush
to the fixture (1). You can then remove
the brushes from the fixture.
CAUTION
► After changing, tighten the screws so
that the brush cannot turn.
Comfort Clean
17