Technical Specifications - FONESTAR VINYL-13 Manual De Usuario

EN
INSTRUCTIONS FOR USE
OPERATING
1.- When using the turntable for the first time, the belt must be fitted to the turning mechanism. To do this,
use the holes located on the turntable.
NOTE: The belt is located underneath the turntable.
2.- Depending on the type of record going to be played (33 or 45 rpm), choose the required speed with the
switch on the upper panel.
3.- Release the locking clamp arm.
4.- Remove the needle protector.
5.- Raise the arm lifting lever and place the arm on the record. This will automatically activate the rotation
of the plate..
6.- Put the needle at the start of the record and lower the cueing lever. The tonearm will gently lower itself.
7.- When you have played all the tracks on the record, the turntable will continue to turn until it switches to
standby mode or until you put the arm back into the locking clamp.

TECHNICAL SPECIFICATIONS

CHARACTERISTICS
POWER SUPPLY
DIMENSIONS
ACCESSORIES
VINYL-13
Hi-Fi belt drive turntable.
Precision DC servo motor with rapid start/stop and auto-standby
function.
Straight arm with slow rise and fall.
Phono/line selector.
2 speeds: 33 and 45 r.p.m.
Pitch adjustment.
MDF wood construction.
PVC finish.
12 V DC, 200 mA including adapter
432 x 135 x 349 mm depth
Audio cable 2 x RCA, 1.5 m
Transparent cover
- 4 -