König Electronic GAMX360-HOLD1 Manual De Uso página 2

Kinect Sensor TV Mounting Kit
Back view of the installed kit with Kinect sensor
Before you start to operate, check which screws will fit your television.
Screw the mounting kit onto the back of your television.
Check if the extension arms are needed depending on the size of your television.
1.) Extension Legs
2.) Mount Foot
3.) Mount Feet
Screw the foot onto the Kinect sensor (see mount foot on picture 3).
Then slide the Kinect sensor (with foot) onto the bracket.
You can click the device further onto the bracket depending on the thickness of the screen.
ENGLISH
Picture 1
Picture 2
Picture 3
2