Publicidad
PORTABLE SOUND AMPLIFIER / SPLITTER
Using of the CMP-SOUNDAMP10
1. Charge the device before first use for a minimum of 3 hours.
•
Use the USB cable which is in the box to charge the device via a computer or adapter (not
included).
•
The orange LED illuminates while charging. After about 2 hours the LED will turn off
2. Connecting the device.
•
Connect a music player, tablet PC, laptop, phone etc. to the LINE-IN of the device and the
power will be turned on automatically. The blue LED will illuminate.
•
Connect up to two headphones to the PHONES-OUT of the device. (Note: single headphone
use will provide a longer battery life).
•
Unplug the music player cable from the CMP-SOUNDAMP10 to automatically turn off its power.
Safety precautions:
Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
ENGLISH
1, 2: PHONE-OUT
3:
LINE-IN
4:
MINI 5pin USB POWER CONNECTOR
2
Publicidad
