Chauvet Professional VIP Pro Guía De Referencia Rápida página 2

VIP™ Media Server Pro QRG
About This Guide
Disclaimer
Safety Notes
Contact
The VIP™ Media Server Pro Quick Reference Guide (QRG) contains information
about the product including instructions on how to install, mount, and connect
your media server.
·
The information and specifications contained in this QRG are subject
to change without notice.
·
You must read ALL the disclaimers and Safety Notes in this guide,
including any documentation that came with the software before
installing, operating, and maintaining this product.
·
It is recommended to mount this product in a shock-mount case
using rail kits providing adequate ventilation.
·
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
·
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
·
DO NOT operate this product if the housing or cables appear
damaged.
·
Do not run this product near magnets, televisions, or transformers.
·
ONLY connect this product to a grounded and protected circuit.
·
To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power
via breaker or by unplugging it.
·
Any damages caused by manual modifications are not subject to
warranty. Chauvet will not accept liability for any resulting damages
caused by unauthorized modifications or not observing the safety
warnings and instructions in this guide.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit
contact information.
2
www.chauvetlighting.com
EN
for