Campomatic tutti frutti j500 Manual De Usuario página 17

Dismounting and assembly
(Fig. C / M)
When using for the rst time or after
a long period of disuse carefully
clean all the parts (see "Cleaning"
chapter).Rinse thoroughly and dry
the parts before using them again.
To dismount the appliance, proceed as
follows:
Before cleaning,
ALWAYS remove
the plug from the
mains socket.
Lift the safety hooks (2) ( gure "C").
•
Remove the cover (8) ( gure "E").
•
Remove the basket (6) from motor unit
•
(1) ( gure "F").
The basket (6) is particularly delicate.
Handle with care.
Remove the pulp lter (7) and the juice
•
chute (5) ( gure "F").
Remove the cups (4) from the motor unit
•
(1) ( gure "G").
To correctly assemble the appliance:
First place the juice chute (5) on the
•
motor unit (1), then the pulp lter (7)
( gure "F").
Insert the basket (6) on the drive joint
•
(1c) pressing it downwards until you
hear the "click" of it engaging
( gure "H").
Correctly position the cover (8) and x
•
it to the motor unit (1) with the special
safety hooks (2) ( gure "D").
- - Use - -
8
11
•
•
•
•
•
- 17 -
17
The safety switch (11) prevents the
operation of the appliance if the
cover (8) is not correctly engaged.
Remove the juice collection cup (3) from
the pulp collection cup (4) ( gure "L").
Place the pulp collection cup (4) on the
motor unit (1) as illustrated in gure
"M".
Use
Before using the appliance, make
sure that the basket (6) is not
damaged. In such case, replace
with original spares.
Place the juice collection cup (3) under
the spout (5a) ( gure "M").
Make sure that the pulp collection cup
(4) is correctly positioned ( gure "M").
Prepare the food to be processed by
cutting it into suitably sized pieces so
they can be inserted in the duct (8a) of
the cover (8).
j500
EN