Silvercrest GTA2000 Manual Del Usuario página 129

6. You can then assign a so-called "hotkey" or a "link" to the macro key K1.
A "hotkey" is a key combination defined by the programme or operating
system which executes a certain function. In Windows programmes, for
example, you can use the key combination <Ctrl>+<c> to copy the cur-
rently selected object (text, graphic, circle, line etc.) onto the clipboard
and then paste this object to the current cursor position with the key
combination <Ctrl>+<v>.
A "link" is a reference to an executable file. This link therefore also starts
a programme. If you click the [...] button, a dialogue box is opened in
which you can select the required programme.
The following section describes how to assign a hotkey, in this case the
function <Ctrl>+<P> (print), to the macro key K1.
7. Proceed as follows:
−
Activate the "Use hotkey" radio button.
−
Check the box in front of "Ctrl" and select "P" in the drop down list.
−
In the "Hint" box enter the word "Print".
This text is displayed when the "Free Notes" profile is active and ...
... when you position the cursor on the macro key K1 in the preview
area of the "Macro Key Manager".
... when you position the pen on the macro key K1 when you are work-
ing with the pen pad.
−
Click the [Confirm] button (save).
You can then programme more macro keys either in the same profile or
in a different profile which you can select in the top left drop down list. It is
only important that you click [Confirm] when you have specified the com-
mand.
Silvercrest GTA2000 pen pad
English
127