3 Use
3.1 Instructions
Improper use
Danger of fire or explosion
• Do not use or leave flammable materials
near or inside the drawer.
3.2 First use
1. Remove any protective film from the outside
or inside of the appliance.
2. Remove any labels (apart from the
identification label).
3. Clean the appliance using a damp cloth.
4. Dry the appliance thoroughly.
Use
Cleaning and maintenance
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use detergents which are
abrasive, corrosive or which contain
chlorine, ammonia or bleach (e.g.
scouring powders, stain removers, etc.).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.2 Cleaning the appliance
Cleaning the drawer
1. Remove the non-slip base.
2. Place some non-abrasive detergent on a
damp cloth and wipe down the surfaces.
3. Rinse thoroughly.
4. Dry with a soft cloth or a microfibre cloth.
Cleaning the non-slip base
1. Remove the non-slip base.
2. Clean with lukewarm water and non-
abrasive detergent.
3. Dry thoroughly with a soft cloth or a
microfibre cloth.
4. Replace the non-slip base in the drawer
when perfectly dry.
9