Adaptive Intelligent Recovery; Programmable Mode - Honeywell EConnect TL9160AR Guía De Instalación Del Sistema

System Installation Guide

Adaptive Intelligent Recovery

Available only if you use the thermostat in programmable mode.
When Adaptive Intelligent Recovery is on, the thermostat "learns" how long your heater
takes to reach the set temperature. The thermostat will then determine when to activate
heating so the desired temperature is attained at the desired time. The thermostat
reassesses the heating start time daily based on the previous day's performance. When
Adaptive Intelligent Recovery is off, heating starts at the set time.
# Display
1)
2)

Programmable mode

The thermostat is factory-set as a 7-day programmable thermostat. To set it as a non-
programmable thermostat, proceed as follows:
# Display
1)
2)
69-2474EFS—01
Button
Button
18
Step
From the installer's setup
menu, press to select
Recovery and press OK.
to select OFF
Press or
and press OK.
Step
From the installer's setup
menu, press to select
Schedule and press OK.
to select OFF
Press or
and press OK.