Sailing Timer Sound Alert; Sea Level Pressure Display - Oregon Scientific RA202 Manual De Uso

4.Press + or - to select the memory 4.Press
record you wish to view record you wish to view
5. Press and hold SET 5. Press and hold
6. Press + or - to delete 1 memory 6. Press
or all records or all records
7. Press and hold 7. Press and hold SET to confi rm
NOTE When any countdown timer has reached When any countdown timer has reached
zero, it will beep and automatically start to count up in
stopwatch timer.
NOTE In the Sailing Timer Mode, only one of the In the Sailing Timer Mode, only one of the
timers can be used at a time.

SAILING TIMER SOUND ALERT

The countdown timer advises you of the countdown
status with a series of beeps.
COUNTDOWN TIME AT THE: COUNTDOWN TIME AT THE:
10 th , 9 th , 8 th , 7 th , 6 th min min
5 min min
th
4 th , 3 rd , 2 nd min min
60 th - 51 st sec sec
50 th , 40 th , 30 th , 20 th , 10 th sec sec
9 - 1 sec sec
th st
0 sec 0 sec
SET to confi rm
SET
SOUND ALERT SOUND ALERT
2 beeps 2 beeps
5 sets of 2 beeps 5 sets of 2 beeps
2 beeps 2 beeps
Continuous beeps Continuous beeps
2 beeps 2 beeps
1 beep each sec 1 beep each sec
1 long beep 1 long beep
15

SEA LEVEL PRESSURE DISPLAY

The sea level history can be viewed as a measurement
reading in hPa / inHg or as a line chart. It consists of 7
rows and 14 columns.
The latest reading is entered in the right hand column
and always at the height of the 4th row. Therefore, all
the other readings will adjust their position to refl ect the
latest reading.
NOTE 1hPa=0.02953inHg 1hPa=0.02953inHg
Look at your watch to see what your sea level pressure
is, then look at the line chart to see the changes in
pressure. See the table below for how to read the line
chart in more detail.