Technical Specifications - Smanos X330 Manual Del Usuario

EN
Step 1: The ideal mounting height of the motion detector is 2 meters from the floor. It
is suggested to mount it at the corner of the wall or just stick it to the wall by using the
supplied 3M sticker.
2 m
Ground
Step 2: After mounting the detector, please walk from left to right in the room for a test;
The status indicator will blink once when motion is detected.
Note: This PIR motion detector can also be mounted at special location by using the
supplied bracket and screw kits.
31
X330-UM-EN-FR-ES-PT-V1.0.indd 31-32

Technical Specifications

X330 Control Panel
Power supply DC 12V 500mA
WCDMA frequency 900/2100MHz or 850/1900MHz
Standby current <36mA
Alarm current <55mA
Back-up battery 3.7V 1800 mAh 18650 lithium battery
Built-in siren 105dB
Maximum wireless accessories 10 remote controls, 50 sensors
Housing material PC Plastic
Radio frequency 868MHz or 915MHz
Temperature 0°C~+55°C
Relative humidity <80% (non-condensing)
Control panel dimensions 175 x 39 x 97 mm (L x W x H)
Bracket dimensions 135.5 x 61 x 20 mm (L x W x H)
MD9100 Pet-Immune PIR Motion Detector
DC 3V(1.5V AA battery x 2)
Power supply
Static Current <50uA
Alarm current <9.5mA
Detection Scope 8 meter/110 degrees
Pet Immunity <20 kgs
Wireless transmitting distance Maximum of 80 m (open field/no interference)
Housing material ABS Plastic
Radio frequency 868MHz or 915MHz
Temperature 0°C~+55°C
Relative humidity <80% (non-condensing)
Detector Dimensions (L x W x H) 128.5 x 59 x 37 mm
Bracket Dimensions (L x W x H) 60 x 29 x 27 mm
EN
32
2016/8/19 15:41:14