Using The Laser Pointer; Aligning The Laser Beam Horizontally; Aligning The Laser Beam Vertically; Cleaning And Care - Powerfix Profi PLW 3 A1 Instrucciones De Uso

Using the Laser Pointer

Aligning the laser beam horizontally

♦ Hold the appliance with the narrow side to the wall, so that the spirit levels
and
♦ Place the On/Off switch
beam cross appears.
♦ Align the Laser Spirit Level such that the air bubble in the spirit level
GB
exactly in the middle of the markings.
MT
♦ Place the On/Off switch

Aligning the laser beam vertically

♦ Hold the appliance with the narrow side to the wall, so that the spirit levels
and
♦ Place the On/Off switch
beam cross appears.
♦ Align the Laser Spirit Level such that the air bubble in the spirit level
exactly in the middle of the markings.
♦ Place the On/Off switch

Cleaning and Care

With the exception of battery exchanges this appliance is maintenance-free.
IMPORTANT
To avoid damage to the appliance, ensure that moisture cannot penetrate it
during cleaning.
► Do not use aggressive detergents or abrasive materials.
These could damage the upper surfaces.
■ Clean the outer surfaces with a soft and lint-free cloth.
■ Clean the laser exit openings
■ Store the Laser Spirit Level in a dry and, if possible, dust-free environment.
30
Using the Laser Pointer/Cleaning ...
are facing forward.
4
are facing forward.
4
at the position I to switch the laser on. A laser
5
at the position 0 to switch the laser off .
5
at the position I to switch the laser on. A laser
5
at the position 0 to switch the laser off .
5
with a soft brush.
6
3
lies
4
3
lies
3
PLW 3 A1