Time Lapse - National Geographic EXPLORER 5 Instrucciones De Uso

EN

Time Lapse

The time-lapse function takes a series of photos at specified intervals. The camera emits a shutter sound each time a photo is taken. With
TL Duration, you can set a duration for the recording.
Burst Mode (Continuous shooting)
The camera triggers continuous shooting. The camera takes a series of 3 or 5 photos each time the shutter is activated.
Save & Playback
When you are finished recording, you can transfer videos to your computer via SD memory card (through a card reader).
Playback on the camera:
1. Enter the video or photo playback mode. If the SD card contains a lot of contents, it may take a minute to load.
2. Press the  or  button to scroll through the video or photo files.
3. Press the "OK" [ ] button to open the video or photo in full screen mode.
4. Press the [ON/OFF] / Mode [ ] key to return to the file list.
5. To cancel the playback mode, press the [ON/OFF] / Mode [ ] button again.
EXPLORER 5
Playback on the television set:
1. Switch on the television set.
2. Connect the Micro HDMI end to the camera and the HDMI end to the HDMI on the television.
3. Select the correct input source on the TV set.
4. Turn the camera on after a while. You can preview the camera from the TV.
5. Set the camera to the video/photo playback mode.
6. Select the desired content for playback.
31