Insert Cartridge - Du Pont WFPT200 Serie Instrucciones De Instalación

Installation
Allow excess water to drain completely from the cartridge.
Insert the cartridge into the reservoir by lining up the notch in
the cartridge with the rib in the cartridge reservoir. Press the
cartridge in firmly to ensure a tight seal. Fill the reservoir with
cold tap water. It is normal for carbon particles to appear in the
first few fillings. Use the first two pitchers of filtered water to
water plants, or simply discard.
Fill the top reservoir with cold tap water only and allow it to
drain into the pitcher. Enjoy the refreshing taste of filtered water.
NOTE: Before refilling your pitcher, press firmly on the cartridge in
the reservoir to assure a good seal.
WFPT200 / WFPT100 / WFPT075
4
Step
Drain Excess Water
5
Step

Insert Cartridge

6
Step
Fill Reservoir
7 V4.8D