Geutebruck GeViScope-HS/R Manual De Operación página 41

To make full use of the capabilities of GeViScope, please read both the enclosed
instructions for set-up and first use and the help files. They give you all the infor-
mation you need to use the GSCSetup and GSCView software modules.
Sections 2 and 3 will give you an overview of the structure and operating interfaces
of the two software modules.
This information is supplemented with further detail on the configuration in
Sections 4 and 5. Section 6 will help you to understand the philosophy of
GeViScope, and illustrates use of the device through relevant practical examples.
Licensed clients will be discussed thoroughly in Section 7.
After establishing one or more connections, four steps are necessary to use any
of the functions.
The summary will tell you in which sections you will find further information.
Step 1
Step 2
Step 3
Step 4
It is possible that you will have to add additional licences before you can use the
licensed clients. See Section 4.8 for a discussion of licence management; the licence
contents are considered further in Section 7 with reference to the individual clients.
Hardware for initialising the DSP module
Further information -> Section 4.5
Media channels for determining the functionality (permanent
recording and/or live streaming, audio, activity mode and pri-
vacy zones). Further information -> Section 4.1
Database, if you want permanent recording
Further information -> Section 4.6
Users, to set up further GeViScope users and to specify their
rights. Further information -> Section 4.7, with more on the
subject of user profiles -> Section 5.1
15