This way you can use the power optimally.
Do not use recipients with a rough base to avoid
scratching the thermal surface of the top.
A very important factor in induction cooking is the dimension
of the pot compared to the plate used (Fig.8B). The
cooking zones allow the use of recipients with bases of
various diameters. It is, however, preferable to use the
appropriate cooking zone for the dimension of the pot.
Behältern mit unterschiedlichen Durchmessern Fonds. Es
„immer noch vorzuziehen, die entsprechende Kochzone
dem Durchmesser des Topfes Sie verwenden möchten,
verwenden:
- Wenn der Durchmesser des Topfes 160 mm, die Pot.
detection ist. beträgt 90 mm und 180 mm Pot.max ist;
- Wenn der Durchmesser des Topfes beträgt 200 mm, ist die
Pot.detection 120 mm und der Pot max. 210 mm.
SWITCHING THE COOKING TOP ON
• Connect the stovetops to the mains
• SWITCHING THE COOKING TOP ON
Press A
key to switch the top on.
All the displays relative to the cooking zones switch on in
the
standby position. The control unit remains active
for 20 seconds. If no cooking zone is selected within this
time, the cooking top switches off automatically
• SELECTING THE COOKING ZONE
To select the required cooking zone, you have to press
(within the area of the circular selector "Round") in
the position corresponding to the display
• ADJUST THE POWER OF COOKING
To increase / decrease the power of the cooking zone
selected, crawl in a clockwise / counterclockwise (in the
area of the circular selector "Round"). The power can
be set from 0 to 9.
• QUICK / BOOSTER HEATING
This function further reduces cooking time in a given area
taking the temperature to the maximum power for a
minute interval. At the end of this interval, the cooking
area power automatically returns to level
this function is indicated for the short time heating of large
quantities of liquid (eg water for cooking pasta) or dishes.
While adjusting power level of the selected cooking zone af-
ter level 9 you get into the mode indicated by BOOSTER
• KEEP WARM FUNCTION:
The hob has one program with pre-set temperature for
maten food warm, the program has a temperature of
42 degrees. To set function, select the required cooking
zone, you have to press (within the area of the circular
selector "Round") in the position corresponding to the
display. Increase the power of the cooking zone selected,
crawl in a clockwise (in the area of the circular selector
"Round"). Between 0 and 1 symbol
function is active.
• TIMER USE
After selecting the cooking zone, press on B
display shown above Round
inside of Round (clockwise or counterclockwise) will in-
crease or on decreasing the time (in minutes: 00 min. 99
min.), or by repeatedly pressing the icon B
skip forward 10 minutes. for every touch. Set the time on
the side of the display area of the the selected cooking
symbol
has been timed.
That procedure shall be activated for each cooking zone.
• RESIDUAL HEAT
If the temperature of the cooking zone is still high (over
50°) after it has been switched off, the relative display will
indicate the
only switch off when the burn risk in no longer present.
• POT DETECTION
If the symbol
area displays, it means that:
1)The recipient being used is not suitable for induction
2)The diameter of the recipient used is inferior to that
3) No recipient is present.
• EGG TIMER / REMINDER
Is it possible to set a reminder tone. Press the icon B
counterclockwise) to set a time for the reminder from 1 to
99 minutes. When the time set will sound an audible alarm
that can be turned off by pressing any of the commands.
The cooking areas on previously will remain active. The
EGG TIMER function remains active even after the unit
is turned off. To disable this function, you must
(clockwise or counterclockwise).
• POWER RESTRICTION:
10
9
.
The use of
The stove, automatically limits the absorption of zones
A and B, the maximum threshold is reached, the cooker
beeps and does not allow other operations on the cooking
appears, the
zones.
• PAUSE
Pressing D key, when at least one cooking zone is in action, you
, the
can pause the device, temporarily stopping cooking. The cor-
. Now swiping the
responding LED D1 lights up and the display appears
break lasts 10 minutes, after which, the unit turns off automati-
cally. The pause function can be deactivated by pressing the D
, you will
key, and within 10 seconds, crawl clockwise / counterclockwise,
within the area of the circular selector "Round" and the corre-
- 8 -
will appear indicating that the cooking zone
symbol (residual heat). The symbol will
should appear on one of the cooking
cooking.
allowed by the appliance.
COOKING ZONE DIAMETER
Ø 160 mm
Ø 200 mm
Ø 250 mm
, now swiping the inside of the Round (clockwise or
the timer display swiping the inside of the Round
Max. 7400 W 32A (16A + 16A)
( A ) Max. 3700 W 16A
Max.
1400 W
P: 2000 W
Max.
2300 W
P: 3000 W
Max.
1100 W
P: 1400 W
MINIMUM PAN DIAMETER
110mm
145mm
180mm
state
( B ) 3Max. 700 W 16A
Max.
2300 W
P: 3000 W
Max.
1100 W
P: 1400 W
. The