Brandson 303319 Instrucciones De Uso Y Seguridad página 25

5. Installation
Take the appliance out of the packaging and remove any packaging material and
check the appliance for any damage. The fan heater must be placed on a firm and
flat surface. Ensure that the heater is placed at least 1m away from other objects,
and not directly below a socket. A socket should be available for supplying power
to the appliance.
Caution! Ensure that the appliance is not placed near any flammable materials or
fluids, or with the air discharge pointing in this direction.
6. Commissioning
Connect the appliance to a 230 V AC socket. To start the appliance, turn the "Power
regulator" at the top to the desired speed.
0
Fan symbol
1
2
English
Fan is switched off
Only fan is switched on
First heat setting (750W)
Second heat setting (1500W)
25