Mode Switching; Alarm Mode; Calendar Mode; Safety Precautions - Basic XL BXL-WS11 Manual De Uso

Weather station
A. Mode switching
Press [MODE] to switch among Time, Alarm and Calendar modes.
B. Time mode
1). Starting from the normal time display, press [SET] for 2 seconds to set
12/24hr, hour, and minute. Press [ADJUST] to increase by one. Press
[MODE] to quit the setup.
2). In the normal time display, press the [ADJUST] key to check the MAX and
MIN of the temperature and hygrometer.
3). In the MAX or MIN temperature display, press [ADJUST] for 2 seconds to
clear the memory of the MAX and MIN temperature and replace it with
the current value.
4). In the normal time display, press the [C/F] key to change the °C and °F
degree display.
C. Alarm mode
1). Starting from the normal time display, press the [MODE] key once to enter
the Alarm setup waiting status, then press [SET] for 2 seconds to set the
hour of the Alarm time and press [SET] again to set the minute of the
Alarm time. Press [ADJUST] to increase by one. After setting, press
[MODE] to quit the Alarm setup.
2). In the normal time display, press [MODE] to enter the Alarm status, then
press [ADJUST] to switch on the Alarm and the beep for each hour, and
press [MODE] key to quit.
D. Calendar mode
1). Starting from normal time display, press [MODE] twice to enter the
Calendar setup waiting status, press [SET] key for 2 seconds to set the
Year, press [ADJUST] to increase by one. Press the [SET] and [ADJUST]
keys in turn to adjust the Month and Date accordingly.
2). Press [MODE] twice to quit the Calendar Mode and resume the Time
display status.
E. Snooze mode
1) When the alarm is ringing, press [SNZ] or do not press any key, the
snooze function will work and it will ring again every five minutes. It can
repeat for a total of four times.
2) Press any key except [SNZ] to quit.

Safety precautions:

Disconnect the product from mains and other equipment if a problem should
occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
ENGLISH
To reduce risk of electric shock, this
product should ONLY be opened by
an authorized technician when
service is required.
2