Publicidad
Step 3
D, H
Attach the dump lock assembly to the tray
using M8x20 internal button head bolts (4),
M8 lock nuts (4), and M8 washers (8).
F , G
Step 4
Attach the front axle assembly to the front frame
using M8x40 Phillips flat head bolts (2), M8 lock
nuts (2), and M8 washers (2).
Attach the front axle support arm to the frame
using M8x20 hex head bolts (2), M8 lock nuts (2),
and M8 washers (2).
Step 5
Attach the frame to the tray
using M8x20 internal button
head bolts (2), M8 lock nuts
(2), and M8 washers (4).
D, H
F , G
Step 6
Attach the wheels by first placing the wheel spacers
(4) onto each axle, then placing the wheel (4) onto
each axle and finally placing the wheel washers (4).
Insert the cotter pins (4) into the hole at each end of
the axles and bend back the ends of the cotter pins
with pliers to keep them in place.
Step 7
Attach the handle to the yoke
using M8x60 internal button
head bolt (1), M8 lock nut (1),
and M8 washer (1).
Publicidad
