How To Use The Flash; Video Clips; Recording Of Video Clips - THOMSON 475575 Manual De Instrucciones

2.14 How to use the flash

The flash can be set according to shooting conditions.
Be careful: The flash cannot be activated in Macro mode.
press on the key 3 (
modes :
A
Automatic flash
The flash fires automatically if the lighting is low.
Backlight flash
The flash fires in every shooting. Use this mode for subjects
against the light.
Disabled flash (default setting)
The flash does not fire even if the lighting is very low

3.0 vIDEO clIpS

3.1 Recording of video clips

Do make the settings as below in the video mode.
You can record video clips in VGA (640x480) with sound on
the memory card.
• turn on the digital camera and monitor the shooting mode.
• press once on the key M to select the video mode. A small cam-
corder appears in upper left of the screen.
• point the camera at the subject and centre the photo through
the lcD screen.
• Press once on the shutter button to record video sequences.
• press once again on the shutter button to stop recording.
P 12
vIDEO clIpS
) and select either of the following flash