How The Thermometer Works; Operating The Thermometer - Ega Master EGA TRONIK 51262 Manual De Instrucciones

Button /
Connector
Press YELLOW button to toggle between MAX, MIN, DIF, AVG, HAL, LAL,
YELLOW Button
SET
Press
DATA
Data transfer button to be used with
Insert the K type thermocouple into this jack to carry out contact temperature
TC-K jack
POWER jack
After connecting the USB cable, the Thermometer automatically selects USB
USB port
Infrared thermometers measure the surface temperature of an opaque object. The Thermometer's
optics sense infrared energy, which is collected and focused onto a detector. The Thermometer's
electronics then translate the information into a displayed temperature reading which appears on
the display. The laser is used for aiming purposes only.
The Thermometer turns on when you press the trigger.
The Thermometer turns off when no activity is detected for 8 seconds.
To measure temperature, aim the Thermometer at the target, pull and hold the trigger. Release
the trigger to hold a temperature reading.
Be sure to consider distance-to-spot size ratio and filed of view. The laser is used for aiming only.
Table 2. Buttons and Connector
Press YELLOW to turn the Thermometer on again and displays the last
Details refer to the below User Setup topics.
to step through turning the display backlight on, level one display
backlight, level two display backlight and turning off the display backlight.
Press to turn the laser on and off. After laser is on,
When the Thermometer enters the setup up mode, press
option, details refer to the below User Setup topics.
When the Thermometer enters the user setup mode, press
option, details refer to the below User Setup topics.
Insert the power adaptor into this jack.
power supply and two levels white colour Backlit Display will be on.
With the software installed, it could carry out data transferring and

HOW THE THERMOMETER WORKS

OPERATING THE THERMOMETER

Description
DATA nad T-C options.
measurement result.
Press to enter set up mode.
icon will be on and off also.
. Details refer to User Setup topics.
measurement.
management.
will be shown.
to select an
to select an
25