Automatic Mode; Absence Mode - Gabarron CTP10 Manual Del Usuario

Automatic mode

Turn the knob to AUTO.
Time
Measured
temperature
Absence
mode
Comfort or economy
manual mode
(up to program change)
When starting up, the temperature measured by the
thermostat is displayed (the
the °C).
i
Press the button to display the set-point temperature.
• The temperature display can be reversed (CF02 start
up menu):
- automatic mode: set-point temperature
i
- press : measured temperature
• If you do not want to use a program, you can go to
continuous Economy mode (knob turned to
continuous Comfort mode (
Protection mode ( ).
Current setting
(e.g. comfort)
Day
Heating
demand
mode
Manual temperature mode
(from 30 minutes to 72 hours)
symbol appears above
),
) or continuous Frost
- 32 -

Absence mode

This mode is used to set a
temperature (5 to 15°C) for
a period that can be set from 1
to 365 days.
From the automatic mode (AUTO),
press the button.
The number of days flash on and
off.
Press + or - to set the number of
days.
Example: leaving on 10 January,
returning on 19 January, indicate
9 days.
Automatic operation will restart on
19 January at 00.00 h.
Press OK to confirm.
The temperature flashes on
and off.
Press + or - to set the temperature.
Press OK to confirm.
To cancel the absence mode (e.g. when returning
early), press the C button or turn the knob.
- 33 -