Instruction For Use; Warning Information - MicroPower Access BMU Instrucciones De Uso

Access™ BMU –

Instruction for use

General
This manual is valid for the following models:
• BMU Pro
• BMU Pro with separate current sensor cabling
• BMU Basic
• BMU Basic Dry
• BMU Pro UL
• BMU Basic UL
Access™ BMU Pro, BMU Pro with separate
current sensor cabling, BMU Pro UL, BMU Basic,
and BMU Basic UL is designed for monitoring
vented lead-acid batteries. The unit is mounted on
the battery and monitors voltage, temperature and
electrolyte level. BMU Pro, BMU Pro with separate
current sensor cabling, and BMU Pro UL also
monitor current and voltage balance.
Access™ BMU Basic Dry is designed for
monitoring vented and valve-regulated lead-acid
batteries. The unit is mounted on the battery and
monitors voltage and temperature.
The functions in Access™ BMU are activated,
deactivated and adapted using the PC software
Access™ Service tool or the Android app and the
NFC interface. Information about the charging and
discharging process, the battery status and
deviations are stored internally in the unit.
Access™ BMU communicates wirelessly with
other Access™ units.
Access™ BMU is permanently mounted on the
battery or used as a temporary instrument for
troubleshooting or operating analysis.
When using Access™ BMU together with the
Access™ battery charger, the battery charger is
sent battery specific parameters from the battery
monitoring unit for optimal charging of the battery.
The status of the battery can be read on the
charger's display.
Information concerning the product's part number,
serial number and rating can be found on the rear
of the unit.
Safety

Warning information

Hazardous situations and precautionary measures
are presented in the text as set out below.
Warning
Situations that may result in severe personal injury
or death if the instructions are not followed.
Caution
Situations that may result in personal injury or
damage to the product if the instructions are not
followed.
Note:
Information that is important without being related
to safety.
General
Always keep the manual in the vicinity
of the product.
The manual contains important
information about safety and user
instructions.
Read and understand these instructions, the
instructions supplied by the battery manufacturer
with the battery and the employer's safety
instructions before the product is used, installed or
serviced.
Only qualified personnel may install, use or service
this product.
ELECTRIC SHOCK
The battery may deliver voltages on a
level that may cause personal injury
Warning
Disconnect the charger or vehicle before
installation, maintenance, servicing or
disassembly.
Do not touch uninsulated battery terminals,
connections or other live parts.
3